Barco R9001330 - Manual (Page 88)

Installation
12-2
Installation
12-2 5975288 BARCOGRAPHICS 8200 110497
5975288 BARCOGRAPHICS 8200 110497
Starting up the Installation Mode
Push the control disk up or down to highlight Installation and then
press
ENTER .
Select with or
then <ENTER>
<EXIT> to return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
Select with or
then <ENTER>
<EXIT> to return.
ENTER continues to the Installation mode selection menu.
EXIT returns to operational mode.
The following item can be selected in the Installation mode :
Input slots : to set up the input priority.
Convergence : to align the red, green and blue image.
Configuration : to set up the projector position.
Internal Patterns
Starting up the Installation Mode
Push the control disk up or down to highlight Installation and then
press
ENTER .
Select with or
then <ENTER>
<EXIT> to return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
Select with or
then <ENTER>
<EXIT> to return.
ENTER continues to the Installation mode selection menu.
EXIT returns to operational mode.
The following item can be selected in the Installation mode :
Input slots : to set up the input priority.
Convergence : to align the red, green and blue image.
Configuration : to set up the projector position.
Internal Patterns