Barco R9001330 - Manual (Page 55)

Connections
Connections
7-14 5975288 BARCOGRAPHICS 8200 110497
5975288 BARCOGRAPHICS 8200 110497 7-14
Connecting a RCVDS 05 to the projector.
- Up to 10 or 20 inputs(video) with the RCVDS 05 and 90 inputs when
RCVDS's are linked via the expansion module.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the projector
(source selection and analog settings).
- The selected source number will be displayed on a 2 digit display
and the selected input module will be indicated with a LED on the
rear.
For more information about the use of the RCVDS 05, consult the
owner's manual, order number : R5975765.
Connecting an IR Remote Receiver 800 to the
projector.
S cree n
C o mmu n i c at i o n c a b l e
B A R C O G R A P H I C S 8 1 0 0
I R R emote R ec eiv er 800
P r o j e c ti o n r o o m C o n t r o l r o o m
This infrared red receiver unit makes it possible to control the
projector from another room.
There is a communication line cable between the IR receiver and the
projector or the RCVDS. The control information from the RCU can
now be sent to the IR Remote Receiver 800.
The IR Remote Receiver 800 displays the selected source on a 7-
segment display.
Order number : R9827515.
Connecting a VS05 to the projector.
The VS05 can switch up to 5 Composite Video sources, 3 Super
Video sources and 1 RGB analog or component video source to the
projector. In addition, the audio signal proper to the source, can be
switched to an audio amplifier.
Order number : R9827890
For more information about the use of the VS05, consult the VS05
owner's manual, BARCO order number : R5975245.
Connecting a RCVDS 05 to the projector.
- Up to 10 or 20 inputs(video) with the RCVDS 05 and 90 inputs when
RCVDS's are linked via the expansion module.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the projector
(source selection and analog settings).
- The selected source number will be displayed on a 2 digit display
and the selected input module will be indicated with a LED on the
rear.
For more information about the use of the RCVDS 05, consult the
owner's manual, order number : R5975765.
Connecting an IR Remote Receiver 800 to the
projector.
S cree n
C o mmu n i c at i o n c a b l e
B A R C O G R A P H I C S 8 1 0 0
I R R emote R ec eiv er 800
P r o j e c ti o n r o o m C o n t r o l r o o m
This infrared red receiver unit makes it possible to control the
projector from another room.
There is a communication line cable between the IR receiver and the
projector or the RCVDS. The control information from the RCU can
now be sent to the IR Remote Receiver 800.
The IR Remote Receiver 800 displays the selected source on a 7-
segment display.
Order number : R9827515.
Connecting a VS05 to the projector.
The VS05 can switch up to 5 Composite Video sources, 3 Super
Video sources and 1 RGB analog or component video source to the
projector. In addition, the audio signal proper to the source, can be
switched to an audio amplifier.
Order number : R9827890
For more information about the use of the VS05, consult the VS05
owner's manual, BARCO order number : R5975245.