BT DECTfax Plus Fax Machine and digital telephone system - Manual (Page 16)

Setting up
14
To set the dial mode
1 Press OK/Menu then 2 then 5 . The display
shows 25 DIALLING. Press
OK/Menu .
2 Press the ᮡ and ᮢ buttons to scroll through
the options.
3 Press OK/Menu to confirm the entry.
Ring settings
To set the number of rings before the
machine answers automatically
1 Press OK/Menu then 2 then 6 . The display
shows
26 NO OF RINGS. Press
OK/Menu .
2 Use the keypad to enter the number you
require (2-9).
3 Press OK/Menu to confirm the entry.
To set the ring melody
1 Press OK/Menu then 2 then 7 . The display
shows
27 RING MELODY. Press
OK/Menu .
You will hear the current ringing tone.
3 Press OK/Menu to confirm the entry.
Network and dial settings
Your BT DECTfax Plus has been preset to
work on a direct exchange line, or PSTN.
There is no need to alter this setting unless you
will be using the machine on an internal
network, or PABX. If this is the case:
To change the network setting
1 Press OK/Menu then 2 then 4 . The display
shows 24 NETWORK. Press
OK .
2 Press the ᮡ and ᮢ buttons to scroll through
the options.
3 Press OK/Menu to confirm the entry.
Your DECTfax Plus has two dialling modes:
TONE and PULSE . It is preset to TONE . This is
the correct setting for all direct lines and most
switchboards. For some switchboards it may be
necessary to set the machine to
PULSE dialling.
AB
C 2
GH
I 4
AB
C 2
JK
L 5
AB
C 2
PQ
R
S 7
AB
C 2
MN
O 6
To delete a character use the ᮤ button.
To insert a space use the ᮣ button.