Vicor VI Brick AC Front End Evaluation Board - Manual

UG:111 vicorpower.com Applications Engineering: 800 927.9474 Page 1
VI Brick ® AC Front End
Evaluation Board
USER GUIDE | UG:111
November 2012
Features
n Oscilloscope probe jack for output voltage and ripple measurements
n Simple to use
n Ring lug, screw terminal, and solder connection options
n Replaceable fuse (5 A, 216 Littelfuse recommended)
IMPORTANT NOTICE:
Please read this user guide before operating evaluation board.
Introduction
The VI Brick® AC Front End Evaluation Board offers a convenient means to evaluate
the performance of Vicor’s VI Brick AC Front End module and has been optimized for
user convenience. Refer to the table below for operating conditions and limits.
This product contains an input line filter. It is important to remember the response
of the AC line filter is dependent upon the wiring connected to the evaluation board.
Care should be exercised to minimize stray source impedances in order to fully
exercise the features of the converter.
Contents Page
Features 1
Introduction 1
Set Up 3
Bill of Materials 5
Recommended 6
Hardware
Thermals 6
Ordering Info 6