Vicor VI Brick AC Front End Evaluation Board - Manual (Page 2)

UG:111 vicorpower.com Applications Engineering: 800 927.9474 Page 2
Evaluation Board Basic Specifications and Operating Limits
Please use the following table for operating limits:
Note: VI Brick AC Front End Module operating temperature will depend on its Product Grade as
specified in the datasheet.
Please refer to Figure 1 for locations of the input and output connections as viewed
from the component side. Wires may be soldered directly to the pads instead of ring
lugs if desired to minimize circuit impedances.
Figure 1
VI Brick ® AC Front End
Evaluation Board layout and
dimensional drawing,
component side.
Table 1
Operating Limits
Description Specification Notes
Input Range 85 – 264 Vac Universal input
Output voltage 48 Vdc Partially Regulated, SELV
Output Power 330 W Over entire input range
Operating temperature -40 to 85°C
Limited by hold-up capacitor
and Z01
Output capacitance 6,000 to 12,000μF 63V rating