Vicor VIPAC 28 Vdc MIL-COTS - Manual (Page 12)

11 v i c o r p o w e r . c o m
Pin # Conn. Function Mating Conn.
1 – Vout
J4 -1 – Vout
J4 -2 – Sense
J4 -3 Secondary Control** P/N 16385
J4 -4 + Sense
J4 -5 + Vout
5 + Vout
O
UTPUT
C
ONNECTION
O
PTIONS
1
5
1
5
Micro LugMate
Ring Lugs LugMate Pin Out LugMate (Factory Installed Option)
#4-40 Torque 4 in. lbs.
J4
1
5
1
5
Mini/Maxi LugMate
#10-32 Torque 16 in. lbs.
*Removable jumper is factory installed for local sensing.
See Pg 22 for details
**For units configured in parallel, one module will have
the SC jumped to the –S and –Out.
1
1
1
Solder
Pin # Pad Function
1 – Vout
Rd Trim-Down
SC Secondary Control
Ru Trim-Up
3 + Vout
J4
P/N 16385
Parallel Output Configurations Shown with the output of two modules connected in parallel using BUS BARS.
*Removable
Jumper
*Removable
Jumper
Ru
SC
Rd
Micro LugMate - with Rd/Ru trim
resistor solder pads.
(Design calculator
for trim resistors
located at vicorpower.com)
1
3