Vicor Half-chip PRM-RS Customer Board - Manual (Page 9)

UG:008 vicorpower.com Applications Engineering: 800 927.9474 Page 9
5.2 VTM ® Customer Board Type B (Dual Connectors)
The VTM Customer Board Type B contains dual connectors designed to mate with both X01 and
X03 on the half-chip PRM-RS Customer Board. The additional connector is used to transfer VTM
signal pins, as well as the VS+ and VS- signals between boards. The VS+ and VS- signals are tied
directly to the VTM output and can be used for implementing remote sense as described
in a later section.
Figure 7: VTM Customer Board
Type B
VTM TM CUSTOMER BOA
TYPE B
Power / Signal Connecto
VTM TM CUSTOMER BOARD
TYPE B
Signal Connector
-IN
-IN
-IN
-IN
+IN
+IN +IN
+IN
VC
VC
NC
NC VS+
VS-
IM-VTM
PC-VTM
TM-VTM
VTM -IN
Figure 8: VTM Customer Board
Type B
Connector Pinout (Front View)