Vicor VI Chip BCM Customer Evaluation Board - Manual (Page 5)

The Power Behind Performance
Rev 1.1 08/2014 vicorpower.com Applications Engineering: 800 927.9474 Page 5
Recommended Hardware:
Quantity Description Manufacturer P/N Vicor P/N
4 ring lug Panduit LCAS6-10-L
4 #10-32 screw
}
Kit # 26647
4 #10 flat washer
4 #10 lock washer
4 #10 hex nut
All hardware is stainless steel except the ring lug.
Kit # 26647 is included with the Customer Evaluation Board.
Thermals
For most lab environments a fan blowing across the evaluation board is recommended.
See Application Note
AN:008 at vicorpower.com or contact Vicor Applications
Engineering for assistance (800) 927-9474.
Caution
The BCM and Customer Evaluation Board can comfortably operate at surface
temperatures which may pose a thermal hazard to the operator. Be careful not to touch
any exposed surface. Certain BCMs may operate at potentially dangerous voltages, use
care in such cases. The Customer Evaluation Board is not intended for use in end item
equipment.
Ordering Information
The BCM® evaluation boards can be ordered from the Vicor website: vicorpower.com .
To order the demo boards, substitute BCM with BCD in BCM part number.
See
www.vicorpower.com/dc-dc-converters-board-mount/bus-converter-module
for part number listing.