Vigo VG06063 User Manual
Page 8
FIG.6
THIN
GASKETS
VIEW FROM INSIDE OF THE CABIN
DOOR (12)
SIDE GLASS PANEL (4)
SCREW THIS HALF OF
THE HINGE TO THE SIDE
GLASS PANEL
SCREW THIS HALF
OF THE HINGE TO
THE DOOR
THIS SIDE OF THE
HINGE LOOKS
OUTSIDE OF THE
CABIN
VIEW FROM OUTSIDE OF THE CABIN
12
4
8
C. HINGE INSTALLATION
1.
Clean the glass surface on the side glass panel (#4) where the hinges (#7) are to be installed
with rubbing alcohol.
2.
Position hinges on the side glass panel. [SEE FIG.6] Place a shim between the glass and the
hinge on the bottom. The metal should not rest on the glass. [SEE FIG.6A]
3.
Place gaskets on each side of the side glass panel. Screw the hinges to the side glass panel
with the hex key (supplied).
MODEL VG06063
SCREW THIS HALF
OF THE HINGE TO
THE DOOR
SCREW THIS HALF
OF THE HINGE TO
THE SIDE GLASS
PANEL
7
THIS SIDE OF THE
HINGE IS LOOKING
FROM THE INSIDE
OF THE CABIN
SCREW THIS HALF
OF THE HINGE TO
THE DOOR
SCREW THIS HALF
OF THE HINGE TO
THE SIDE GLASS
PANEL
7
THIS SIDE OF THE
HINGE IS LOOKING
FROM THE
OUTSIDE OF THE
CABIN
FIG.6A
INSIDE VIEW
CLEAR
PVC SHIMS
HINGE (7)
SIDE GLASS
PANEL (4)
INSIDE VIEW
SIDE GLASS
PANEL (4)
HINGE (7)
CLEAR
PVC SHIMS