Explanation of the functions (part 3) – Waldmann PULSE PIR version IV - without MFT User Manual
Page 20
Advertising
20
Operating manual Light Control „PULSE PIR - Vers. IV“
ENG
Function 1.7
Demo mode
Function to demonstrate and to
test the light functions.
The default setting of this function
is “OFF“, i.e., the demo mode
is inactive.
All control times are working in the
seconds range if the demo mode
is switched on.
Note: This mode is left automati-
cally 10 minutes after the last key
was pressed.
The function can be changed on
lights with sensors XXX /R
Explanation of the functions (part 3)
Fig. 2
LED II
Key II
LED I
Key I
Sensor
Note: The functions written
in
blue
are not available.
Advertising