Wasp Barcode WDI4600 2D Quick Reference Guide - Manual (Page 27)

Operating Modes
Quick Reference Guide 23
Stand Mode Operation
Stand Mode: In Stand Mode, the illumination remains on for a
configurable amount of time after a good read occurs. The
scanner exits stand mode when movement is detected. If the
trigger is activated from stand mode, the scanner transitions
into one of the triggered modes.
This feature is available starting with firmware
release 610001013.
ENTER/EXIT PROGRAMMING MODE
♦
Stand Mode = Disabled Stand Mode = Generic Stand
Stand Mode = for All-in-one and Base Stand Mode = Precise Stand