Wasp Barcode WDI4600 2D Quick Reference Guide - Manual (Page 35)

Error Codes
Quick Reference Guide 31
Error Codes
Upon startup, if the reader sounds a long tone, this means the
reader has not passed its automatic Selftest and has entered
FRU (Field Replaceable Unit) isolation mode. If the reader is
reset, the sequence will be repeated. Press and release the trig-
ger to hear the FRU indication code.
The following table describes the LED flashes/beep codes as-
sociated with an error found.
Number of
LED Flashes/
Beeps
Error Corrective Action
1 Configuration
Contact Helpdesk for
assistance
2 Interface PCB
6 Digital PCB
11 Imager