Western Digital WD Sentinel DX4000 User Manual User Manual
Page 57
USING THE WD SENTINEL SERVER’S FEATURES
53
WD SENTINEL DX4000
ADMINISTRATOR’S GUIDE
3. Insert the USB flash drive into the Windows PC USB port. The USB flash drive should
appear in the Select USB flash drive drop-down list.
4. If the USB flash drive is not on the list, click Refresh and search for it.
5. After locating the USB flash drive, click the “I understand...” check box to indicate that
you know the process will delete all files and folders on your USB flash drive.
6. Click Next to display the “Congratulations and Next Steps” page.
7. Follow the steps listed on this page:
a.
Shut down the WD Sentinel server.
b.
Insert the USB flash drive into one of the server’s USB ports.
c.
Restart your server while pressing and holding the Recovery button on the back of the
server.
d.
Continue to hold the Recovery button until the LCD displays "INITIALIZING OK. LOADING
RECOVERY." Release the Recovery button.
e.
Allow the recovery process to complete. When it is done, the LCD displays "UNLOCK
DRIVES SUCCESS."