Western Digital WD Sentinel DX4000 User Manual User Manual
Page 63
USING THE WD SENTINEL SERVER’S FEATURES
59
WD SENTINEL DX4000
ADMINISTRATOR’S GUIDE
a.
Shut down the WD Sentinel server.
b.
Insert the USB flash drive into one of the server's USB ports.
c.
Restart your server while pressing and holding the Recovery button on the back of the
server.
d.
Continue to hold the Recovery button until the LCD displays "INITIALIZING OK. LOADING
RECOVERY." Release the Recovery button.
e.
Wait until the LCD displays "RECOVERY STARTED."
10. Return to the PC and follow the instructions by clicking Next. Make sure the PC is on
the same network as the WD Sentinel server. The application searches for the
WD Sentinel server and performs the final recovery. When the recovery is done, the
default display (WDSentinel and IP address) appears on the LCD. For more information,
see
Online Help
.