Western Digital WD TV Live Hub Media Center User Manual - Manual (Page 12)

WD TV Live Hub Media Center
User Manual
FEATURES AND FUNCTIONS – 7
„ Video output resolution includes 480i, 576i, 480p, 576p, 720i, 720p, 1080i,
1080p.
„ Stereo or multi-channel digital surround audio output (digital surround sound is
only available when using the HDMI or S/PDIF interfaces).
„ Wired or wireless Internet connection for access to online media content.
Plug-and-Play USB 2.0 Support*
„ USB storage device with a USB connector
„ Portable media centers with USB connector
„ Digital cameras/camcorders with USB connector
*For a list of tested, compatible USB devices, see Article #5688 in our knowledge base at
http://support.wdc.com .
USB Storage File System Support
„ NTFS
„ FAT/FAT32
„ HFS+
Connections
Note: This device does not support USB hubs.
Item Component Description
1 USB port 1 Supports connection of compatible removable storage
devices, portable media centers, digital cameras with USB
connectors, and USB wireless adapters.
2 Reset button
(bottom of device) Press for one second to reset to factory defaults (see “Device
Reset” on page 200). Press and hold 10 seconds to toggle
between NTSC and PAL. Use a fine-tipped stylus or the
unfolded end of a paperclip to press the reset switch.
3 Power jack Connects the power cable.
4 S/PDIF (optical)
audio port Connects to your AV receiver (S/PDIF cable sold separately).
5 HDMI port Connects to your TV’s HDMI port (HDMI cable sold
separately).
6 USB port 2 The same function as USB port 1.
7 Ethernet port Supports LAN connection for wired Internet access.
8 Composite jacks Connect to your TV’s analog video and audio jacks.
9 Component jacks Connect to your TV’s component (YPbPr) terminals.
1 2 3 4 5 6 7 8 9