Western Digital WD TV Live Hub Media Center User Manual - Manual (Page 26)

WD TV Live Hub Media Center
User Manual
GETTING STARTED – 21
To unlock a locked WD USB device:
A USB device must be unlocked for the media center to access its contents.
1. Navigate to the Home screen, and select the menu for the media content you
wish to access. It can be Music, Videos, or Photo.
2. In the Unlock your WD Drive screen, press / to select OK, then press OK.
3. Use the navigation buttons to type in the USB drive access password in
the on-screen keyboard. Select Submit, then press OK.
If a wrong password is entered, press / to select OK, press OK, then type in
the correct password. If you enter the wrong password five consecutive times,
the USB drive is placed in a hold state. Press OK to close the error message.
Disconnect the USB drive. Power cycle and reconnect the USB drive and type in
the correct access password.
4. Once the USB drive has been unlocked, the menu bar for the selected media
type will appear. Press / to choose a filter option for displaying supported
media contents, then press OK.
Supported content for the selected media type will be displayed.
5. Use the navigation buttons to select the content you wish to access,
then press OK to start media playback.
Removing a USB Device
To prevent data loss, it is highly recommended that you first press the EJECT button
on the remote control before removing a USB device.
To remove a USB device:
1. Press the HOME button .
2. Press the EJECT button
3. Press / to select the USB device.
4. Press OK. With the selected, press OK again.
5. Disconnect the USB device from the media center.