Component, Hdmi, Aspect ratio – Western Digital WD TV Live Hub Media Center User Manual User Manual

Page 179: Audio output, See “audio output

Advertising
background image

WD TV Live Hub Media Center

User Manual

SETUP AND ADVANCED FEATURES – 174

You will be prompted to select the TV standard applicable to your device. This
setting depends on your regional location.

Options include:

„

NTSC – United States, Canada, Japan, Mexico, the Philippines, South Korea,
and Taiwan.

„

PAL – Europe, Greenland, parts of Africa and South America, the Mideast,
China, India, Australia, and Indonesia

Select a regional TV standard then press OK.

Component

When using the YPbPr cable (green, blue, and yellow connectors) to connect the
media center, select Component in the Video output screen.

You will be prompted to select the video display resolution (from 480p to 1080i).
Select display resolution then press OK.

Note: The further down the list the setting, the higher the resolution and clearer the picture.

HDMI

When using an HDMI cable (if your TV supports HDMI resolution), select HDMI in the
Video output screen.

You will be prompted to select the applicable HDMI video resolution (set to Auto, or
from 480p to 1080p). Select display resolution then press OK.

Note: The further down the list the setting, the higher the resolution and clearer the picture.

After setting resolution, you are prompted to select color space (set to Auto, or RGB
High, RGB Low, or YCbCr). Select color space then press OK.

Aspect Ratio

Use this menu to select the way videos are displayed. Options include:

„

Normal (4:3)

„

Widescreen (16:9)

The media center’s default setting is

Widescreen

. Make sure your TV can support

widescreen resolution, or this default setting can result in a distorted video display.

Audio Output

Advertising