Western Digital My Net N750 User Manual - Manual (Page 47)

ADVANCED SETTINGS
43 MY NET ROUTERS
USER MANUAL
Firewall Screen
Create Firewall Rules
Name Name to identify the firewall rule.
Source Local network (LAN) or Internet (WAN).
Source IP Range Range of IP addresses where the traffic initiates.
Protocol Protocol that will be applied in the firewall rule. Available
options are All, TCP, UDP, and ICMP.
Action From the drop-down list, select whether to allow or deny
incoming and outgoing traffic.
Destination Local network (LAN) or Internet (WAN).
Destination IP Range Range of IP addresses where the traffic is destined.
Port Range Network traffic port range that will be applied in the firewall
rule.
DMZ Screen
DMZ Host
Enable DMZ Toggle the button to On to enable DMZ.
DMZ IP Address If DMZ is enabled, select a computer from the list and click
the double arrows to populate the IP address, or manually
enter the computer’s IP address.
MAC Filter Screen
MAC Filtering Rules
MAC Filtering drop-down
list The default setting is Turn MAC Filtering OFF. Other options
are:
• Turn MAC Filtering ON and DENY computers listed to
access the network.
• Turn MAC Filtering ON and ALLOW computers listed to
access the network.
Active Status of the MAC filtering entry.
MAC Address Unique identifier of your local network device being filtered.
Double arrows After selecting a computer from the DHCP Client List, click
the double arrows to populate the MAC Address box.
DHCP Client List Computers and devices that are currently connected to your
router.