Western Digital My Net N750 User Manual - Manual (Page 52)

ADVANCED SETTINGS
48 MY NET ROUTERS
USER MANUAL
Priority When creating a rule, select the precedence in which the
application or device sends data over the network compared to
other applications or devices. The default value is 1-Highest.
Type From the drop-down list, select the option that specifies
whether the rule applies to a connected device or to an
application.
Detail • For Device rules, specify the LAN IP and/or Remote IP
address(es), and protocol(s) for the rule.
• For Application rules, specify the Start and End port as well
as the protocol for the rule.
• The protocols available are TCP, UDP, and Both.
Delete icon Click to delete the row.
FasTrack Plus QoS (My Net N900 Router)
Enable FasTrack Plus QoS
Enable FasTrack Plus
QoS Enable or disable the QoS application to prioritize different client
applications/traffic types over the Internet.
WAN Uplink Speed
Set Uplink Speed at The uplink speed (in Kbps) at which data can be transferred
from the router to your ISP. The Auto (default) setting
automatically detects the uplink speed. You can select other
values from the drop-down list or enter your own. QoS
prioritizes all Internet traffic based on this setting.
Classification Rules
Name Name given to the service/client for the classification entry.
Priority When creating a rule, select the precedence in which the
application or device sends data over the network compared to
other applications or devices. The default value is 1-Highest.
Protocol Internet protocol for transferring data. Select TCP or UDP.
Local IP Range IP address range of the device(s) on your local network the rule
applies to.
Local Port Range Port range of the application(s) on your local network the rule
applies to.
Remote IP Range Remote IP address range of the service on the Internet the rule
applies to.
Remote Port Range Remote port range of the service on the Internet the rule applies
to.