Western Digital My Net N750 User Manual - Manual (Page 77)

PERFORMING ADVANCED TASKS
73 MY NET ROUTERS
USER MANUAL
3. Enter the following information for each port forwarding rule you create:
4. Click Save at the top or bottom of the page.
Accessing My Net View
Once you install My Net View on your computer, you can use it to diagnose network
problems.
To access My Net View:
1. Double-click the My Net View icon on your Desktop. The My Net View Welcome
page displays.
2. Click Diagnose, and use the online Help (?) to guide you through the diagnostic
procedures.
Port Forwarding Rules
Enabled Select the check box to enable the port forwarding rule. Clear
the check box to disable.
Application Name From the drop-down list, select the application whose data you
want to forward to the client on your local network. Click the
double arrows to populate the Name, Internal Port, External
Port and Protocol fields.
External Port Range Enter the port(s) you want to forward from the WAN interface
(Internet). The port is automatically populated when you pick an
application from the drop-down list.
Protocol Select the protocol that you wish to port forward. The options
are All, TCP, and UDP. The protocol will be automatically be
selected if you pick an application from the drop-down list.
IP Address Can be manually entered or populated by your selection from
the Computer Name drop-down list.
Computer Name Device on your local network to which the rule will be applied.
Click the double arrows to populate the IP Address field.
Internal Port Range Enter the port(s) on the LAN client to which you want to forward
data. The port is automatically populated when you pick an
application from the drop-down list.