Western Digital My Net N750 User Manual - Manual (Page 51)

ADVANCED SETTINGS
47 MY NET ROUTERS
USER MANUAL
ALG Screen
Application Level Gateway (ALG) Configuration
PPTP (Point-to-Point
Tunneling Protocol) Turn On (default) PPTP ALG if you use a PPTP client to dial into
your corporate network via the Internet.
IPSec (VPN) Turn On (default) IPSec ALG if you use a IPSec client to dial into
your corporate network via the Internet.
SIP (Session Initiation
Protocol) A signaling protocol for Internet Telephony. Turn On (default) SIP
ALG if you use VoIP telephone service over your Internet
connection.
Routing Screen
Route List
Active Select the check box to enable the routing entry.
Name Enter a name for the routing entry.
Interface Select the interface (WAN or LAN) for the routing entry.
Destination IP IP address/network to which the data is sent.
Netmask Enter a Netmask for the Destination IP to define the destination
network.
Gateway Enter the Gateway IP address through which this router can be
reached. The Gateway IP should be reachable from your router.
FasTrak QoS Screen (My Net N600/My Net N750 Routers)
Enable QoS
Enable QoS Enable or disable the QoS application to prioritize different client
applications/traffic types over the Internet.
QoS Setup
Uplink Speed The uplink speed (in Kbps) at which data can be transferred
from the router to your ISP. The Auto (default) setting can
automatically detect the uplink speed, or you can select other
values from the drop-down list or enter your own. QoS
prioritizes all Internet traffic based on this setting.
FasTrack Rules Click the Restore Default button to restore the default names
and priorities.
Classification Rules
Name Name given to the service/client for the classification entry.