Yamato Scientific Vacuum controller Vacuum controller - Manual (Page 9)

7
Choose a correct power distribution board or receptacle.
•
Choose a correct power distribution board or receptacle that meets VR100’s rated electric capacity.
Electric capacity : AC100 V, 1A
•
Do not connect VR100 to an outlet that differs from the above specifications because a fire or electrical
shock will occur.
Install on a level area.
•
Do not installation VR100
on a non level surface.
This will cause hazards to
the operator and create
problems during actual
operation.
Choose a proper place for installation.
•
Do not install VR100 in a place where:
♦ Flammable gas or corrosive gas is generated.
♦ Ambient temperature exceeds 35 ° C, also bellow 5 ° C.
♦ Ambient temperature fluctuates violently.
♦ There is direct sunlight.
♦ There is excessive humidity and dust.
♦ There is constant vibrations.
•
Keep the clearance over 15cm around VR100.