Wiring diagrams, Figure 16, 17 42crc color registration control – Rockwell Automation 42CRC Color Registration Control User Manual
Page 19: Continued)
17
42CRC Color Registration Control
Wiring Diagrams
(Continued)
FIGURE 16
Latched Output -- Function Switch Positions
“A” Through “D” with or without External Gating
Cable Assembly #60-2292
Red (+)
(+) Supply
10-30VDC
Resistor by cus-
tomer (if remote
diagnostic indi-
cator is used.)
See Figure 12
for resistor
selection.
30mA max,
remote diagnostic
indicator by
customer (if used)
(--) Supply
*Gating Switch
close to inhibit
(if used)
NPN will sink
0.3mA
*WARNING DO NOT CLOSE THE RESET AND
GATING SWITCHES SIMULTANEOUSLY
Bare-Shield
Black (--)
White-Gate (--)/Reset (+)
Orange-NPN Diagnostic Output
Blue-PNP Output
Reset* Switch
(close to unlatch)
External Connections
42CRC-4001
Connector
Control
Output
(PNP)
Source
Diagnostic
Output
(NPN)
Sink
PNP OUTPUT 42CRC -- 4001
Load
Non-Latched Output -- Function Switch Positions
“E” Through “H” with or without External Gating
Cable Assembly #60-2292
Red (+)
(+) Supply
10-30VDC
Resistor by cus-
tomer (if remote
diagnostic indi-
cator is used.)
See Figure 12
for resistor
selection.
30mA max,
remote diagnostic
indicator by
customer (if used)
(--) Supply
Gating Switch
close to inhibit
Bare-Shield
Black (--)
White-Gate (--)/Reset (+)
Orange-NPN Diagnostic Output
Blue-PNP Output
External Connections
42CRC-4001
Connector
Control
Output
(PNP)
Source
Diagnostic
Output
(NPN)
Sink
PNP OUTPUT 42CRC -- 4001
Load