5accessories—mm (inches) – Rockwell Automation 42G PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors User Manual

Page 5

Advertising
background image

5

Accessories—mm (inches)

Swivel/Tilt Mounting Assembly #60--2439

50.08

(2.0)

57.15

(2.25)

28.6

(1.13)

7.95

(0.31)

Swivel/Tilt Mounting Assembly #60--2681 for ClearSight 9000

10_ Adjustment in

each direction

28.6

(1.13)

7.95

(0.31)

50.08

(2.0)

87.0

(3.42)

Vertical Height Adjustment Brackets

101.6

(4.0)

22.2

(1.88)

139.7

(5.5)

H

#60--2721 = height 4 inches
#60--2722 = height 6 inches
#60--2723 = height 8 inches
#60--2724 = height 10 inches

152.4

(6.0)

7.0

(0.275)

Operational Notes

Ambient Temperature Ratings

80

45

50

55

60

65

70

75

110

260

60

210

160

Supply Voltage, V AC/DC

Am

bient

Tem

perat

u

re

,_

C

40

All models of the Series 9000 with the exception of those with the solid-state output (42Gxx--9xx3) and the EM-relay

output (42Gxx--9xx2) have a maximum operating temperature of +70_C (+158_F). The maximum operating temperature

of the 42Gxx--9xx3 and 42Gxx--9xx2 models can be determined from the graph shown above. That temperature is based

on the supply voltage fed to the sensor. For example, if the operating voltage is 120V AC the maximum operating

temperature would be +70_C (+158_F). An operating voltage of 220V AC would limit the ambient operating temperature

to +55_C (+131_F). Operation of the sensor at ambient temperatures which exceed these limits could result in sensor

failure.

Mounting and Wiring

Securely mount the sensor on a firm, stable surface or support. A mounting which is subject to excessive vibration or

shifting may cause intermittent operation. Rockwell Automation offers a wide variety of fixed and adjustable mounting

brackets as well as reflectors and quick disconnect cables. Refer to www.ab.com/sensors for further information on these

products. The sensor is supplied with the hardware kit #129--130 which contains a plastic mounting nut, lock washer, 2

M5 x 0.8 x 53 screws and nuts. Once securely mounted, the sensor may be wired as indicated in the wiring diagrams.

M5 x 0.8 x 53
Combination

Screws and Nuts

(Supplied)

Hardware Kit

(Supplied)

Advertising