Rockwell Automation 20P PowerFlex DC Drive - Frame A Field SCR/Dual Diode Bridge Module - Manual (Page 11)

PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module 11
Step 5: Remove the
Existing Field SCR/Dual
Diode Bridge Module 1. Remove the four bundled wires from the Field SCR/Dual Diode Bridge
module.
2. Remove the two screws that secure the Field SCR/Dual Diode Bridge
module to the drive heat sink and remove the module.
=
Note: Regenerative drive with bus bars shown.
Remove bundled wires
Remove two screws