Rockwell Automation 20P PowerFlex DC Drive - Frame A Field SCR/Dual Diode Bridge Module - Manual (Page 13)

PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module 13
Step 9: Replace the
Protective Covers and
Documenting the Change 1. Replace the protective covers in the reverse order of removal as
described in Step 2: Remove the Protective Covers on page 3 .
2. Install the DPI cable (if present).
3. Record the installation of the new Field SCR/Dual Diode Bridge
module and date of installation on the Field Installed Option label on
the side of the drive (as shown below).
Related Documentation Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature .
For . . . Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC
drives User Manual - PowerFlex Digital DC Drives 20P-UM001…