Armorstart lt characteristics – Rockwell Automation 294E ArmorStart LT EtherNet/IP Version - User Manual User Manual
Page 23
Advertising

Rockwell Automation Publication 290E-UM001B-EN-P - June 2012
23
Product Overview
Chapter 1
ArmorStart LT Characteristics
Figure 4 - Bulletin 290E/291E ArmorStart LT
6 Configurable I/Os
LockOut/TagOut Provision
Wiring Access
Reset
IP Address Switches
1
On
0
Off
On/Off Switch
HOA Keypad (optional)
Gland Plate – Conduit/Cord Grip or
ArmorConnect
®
Media (optional)
Status and Diagnostic LEDs
Dual Port EtherNet/IP
(This is replaced by a DeviceNet connector,
when DeviceNet communication is selected)
ECM (Electronic
Control Module)
Protective Earth (PE)
Advertising
This manual is related to the following products: