Save the relation list – Rockwell Automation 294E ArmorStart LT EtherNet/IP Version - User Manual User Manual
Page 72
Advertising
72
Rockwell Automation Publication 290E-UM001B-EN-P - June 2012
Chapter 3
Product Commissioning
Figure 44 - Enable DHCP Button
Save the Relation List
You can save the Relation List to use later. To save the Relation List perform the
following steps:
1.
Select Save As... from the File menu.
Figure 45 - Save Relation List
You will see the Save As Dialog.
Advertising
This manual is related to the following products: