Rockwell Automation 294E ArmorStart LT EtherNet/IP Version - User Manual - Manual (Page 44)

44 Rockwell Automation Publication 290E-UM001B-EN-P - June 2012
Chapter 2 Installation and Wiring
Figure 20 - Gland Connection
Wiring Terminal Detail The power, control, and ground wire capacity and the tightening torque
requirements are shown in
Table 8 . The maximum number of connections
per terminal are shown in Table 7 . As shown in Figure 21 all the terminals are
found in the wiring area. Access can be gained by removing the terminal access
cover plate.