Rockwell Automation 20-750-BNETIP BACnet/IP Option Module - Manual (Page 17)

Rockwell Automation Publication 750COM-UM005B-EN-P - June 2014 17
Chapter
2
Installing the Option Module
This chapter provides instructions for installing the option module in a
PowerFlex 750-Series drive.
Preparing for an
Installation
Before installing the option module, verify that you have all required equipment.
See
Required Equipment on page 13 .
Topic Page
Preparing for an Installation 17
Setting the IP Address Selection Jumper 18
Connecting the Option Module to the Drive 19
Connecting the Option Module to the Network 19
Applying Power 20
Commissioning the Option Module 23
ATTENTION: Risk of equipment damage exists. The option module
contains electrostatic discharge (ESD) sensitive parts that can be damaged
if you do not follow ESD control procedures. Static control precautions are
required when handling the option module. If you are unfamiliar with static
control procedures, see Guarding Against Electrostatic Damage,
publication
8000-4.5.2 .