Starter identification – Rockwell Automation 1512B MV Controllers, 200/400A Two-High Cabinet, Standard and Arc-Resistant Enclosure User Manual
Page 10
Advertising

2
Rockwell Automation Publication 1500-UM055G-EN-P - May 2013
Chapter 1
General Information
Starter Identification
A structure nameplate is attached to the right-side flange of the structure (see
). Refer to the nameplate for information such as series number, section
number, NEMA enclosure type, unit ratings and bus ratings.
Figure 1 - Typical Structure Nameplate
A unit nameplate is also found in the low voltage compartment with specific unit
motor application information (see
).
Figure 2 - Typical Unit Nameplate
Refer to these nameplates whenever you contact Rockwell Automation for
assistance. Be prepared to provide such information as series number, structure
series, unit series, diagram schematic and catalog number.
Advertising
This manual is related to the following products: