Rockwell Automation 1512B MV Controllers, 200/400A Two-High Cabinet, Standard and Arc-Resistant Enclosure - Manual (Page 46)

38 Rockwell Automation Publication 1500-UM055G-EN-P - May 2013
Chapter 4 Common Installation
Figure 41 - Incoming Line Cable Connections
3. Connect the ground wire to the ground bus lug.
4. Connect any external control wires to the control panel terminal blocks in
the low voltage compartment. Refer to wiring diagram.
Power
Cable
Lugs
Ground
Bus
Lug
IMPORTANT If line cables require installation by front access, complete the incoming line
connection before installing load cables.