Rockwell Automation 1403-NENET Ethernet Communication Card Installation Instructions - Manual (Page 55)

Publication 1403-IN005A-EN-P
Ethernet Communication Card Data Tables B-41
Table B.33 Setpoint Action
Value Setpoint Action
0 No Action
1 Activate Relay No. 1 and Output Flag No. 1
2 Activate Relay No. 2 and Output Flag No. 2
3 Activate Output Flag No. 3
4 Activate Output Flag No. 4
5 Activate Output Flag No. 5
6 Activate Output Flag No. 6
7 Activate Output Flag No. 7
8 Activate Output Flag No. 8
9 Activate Output Flag No. 9
10 Activate Output Flag No. 10
11 Activate Output Flag No. 11
12 Activate Output Flag No. 12
13 Activate Output Flag No. 13
14 Activate Output Flag No. 14
15 Activate Output Flag No. 15
16 Activate Output Flag No. 16
17
Initiate Waveform Capture Buffer #1
(1)
(1) Not available on 1403-LM.
18 Perform Snapshot
19 Clear kW-HR Power Counter
20 Clear kVAR-HR Power Counter
21
Initiate Waveform Capture Buffer #2
(2)
(2) Available on firmware V3.00 or later.
Table B.34 Relay/Setpoint Status Table Read (File N32)
Parameter No. Parameter Name Master Module Range Element Range
22.1 Time Stamp Year 1 0 to 99
16-bit Integer
Month, Date 2 1 to 12 (8-bit),
1 to 31 (8-bit)
Hour, Minute 3 0 to 23 (8-bit),
0 to 59 (8-bit)
Seconds, Hundredths 4 0 to 59 (8-bit),
0 to 99 (8-bit)