Rockwell Automation 1326 Digital AC Multi-Axis Motion Control System User Manual - Manual (Page 33)

Publication 1394-5.0 — May 2000
Installing Your 1394 (applies to all systems) 2-3
Unpacking Modules Each 1394 System module ships with the following:
• One system module
• One system terminator
• One terminal operating tool (part number 1394-194)
• One user manual (publication 1394-5.0)
• One application program lock key (GMC and GMC Turbo only)
• Mating power connectors (5 and 10 kW Series C only)
• Cable shield grounding clamps (5, 10, and 22 kW Series C only)
Note: To determine the series of your module, refer to Figure P.1 in
the Preface.
Each 1394 Axis Module ships with the following:
• One 1394 Axis module
• TB1 and TB2 connectors
• One 1394 Axis module information sheet (publication 1394-5.5)
Remove all packing material, wedges, and braces from within and
around the components. After unpacking, check the item(s)
nameplate catalog number against the purchase order. Refer to
Appendix D for more information on catalog numbers.
System Mounting Requirements There are several things that you need to take into account when
preparing to mount the 1394:
• The ambient temperature of the location in which you will install
the 1394 must not exceed 50° C (122° F).
• You must install the panel on a flat, rigid, vertical surface that
won’t be subjected to shock, vibration, moisture, oil mist, dust, or
corrosive vapors.
• You have to mount the system vertically.
• You need to maintain minimum clearances (see Figure 2.1) for
proper airflow, easy module access, and proper cable bend radius.
Refer to Appendix A for mounting dimensions, power dissipation, and
environmental specifications for the 1394.