Rockwell Automation 1606-XLE960DX-3N Power Supply Reference Manual - Manual

Reference Manual
Bulletin 1606 Switched Mode Power Supplies
Catalog Number: 1606-XLE960DX-3N
Index
Page
5. AC Input .............................................................3
6. Input Inrush Current ..........................................4
7. Output .................................................................5
8. Hold-up Time.......................................................6
9. Efficiency and Power Losses................................7
10. Functional Diagram.............................................8
11. Front Side and User Elements.............................8
12. Terminals and Wiring..........................................9
13. Reliability .............................................................9
14. EMC ....................................................................10
15. Environment ......................................................11
16. Protection Features ...........................................12
17. Safety Features ..................................................12
18. Dielectric Strength ............................................12
19. Certifications .....................................................13
20. Environmental Compliance ........................... 13
21. Physical Dimensions and Weight .................... 14
23. Accessories ........................................................ 15
25. Application Notes ........................................... 16
25.1. Periodic PeakPower Capability .................16
25.2. Charging Batteries ..................................16
25.3. Output Circuit Breakers
................17
25.4. External Input Protection .........................18
25.5. Back-Feeding Loads ...................................18
25.6. Parallel Use to Increase Output Power ....18
25.7. Parallel Use for Redundancy ....................18
25.8. Series Operation .......................................19
25.9. Inductive and Capacitive Loads ................19
25.11. Use in a Tightly Sealed Enclosure ............19
25.12. Mounting Orientations ............................20
1. Description ...........................................................1
2. Specification Quick Reference ............................1
3. Catalog Numbers .................................................1
4. Certification Marks ..............................................1
22. Installation and Operating Instructions ..........14
24. Comparison between the 1606-XLE960DX-3N,
a Transformer and a Traditional Switched-
Mode Power Supply .........................................15
25.10 Loss of One Input Phase ...........................19
• PE and symbol—PE is the abbreviation for Protective Earth and has the same meaning as the symbol .
• Earth, Ground—This document uses the term “earth” which is the same as the U.S. term “ground”.
• T.b.d.—To be defined, value or description will follow later.
• 3AC 400V—A figure displayed with the AC or DC before the value represents a nominal voltage with standard tolerances (usually ±15%)
included. 3AC means three phase input. E.g.: DC 12V describes a 12V battery disregarding whether it is charged (13.7V) or discharged (10V).
If not otherwise stated, 3AC 400V parameters are valid at 50Hz and 3AC 480V parameters are valid at 60Hz mains frequency.
• 3x 400Vac—A figure with the unit (Vac) at the end is a value used during testing without any additional tolerance included. 3x 400Vac
means a three phase input.
Terminology and Abbreviations