Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE - Manual (Page 135)

OPERATOR INTERFACE TERMINAL PV-550 REV E 7-11
1557-UM050F-EN-P – June 2013
Modify Terminal Operation (Utility)
The utility operation of screens change the characteristics of the terminal. Within this operation
you will:

Set the clock and calendar

Change the delay for the display backlight shutoff

Change the contrast of the display

Define the meters which will be displayed on the Top Level Menu

View the revision levels of all software in the drive system.
 Transfer data between the terminal „flash‟ memory, „flash‟ memory card and the drive.

Load a new language module.
You will access the Utility operation from the Top Level Menu by pressing the [F2] key. This
results in the display of the screen shown in Figure 10.
In all operations on this screen, the value currently being acted upon is shown in reverse video.
Only when the value is in this state, may it be modified.
Figure 9 – Help on Help
Figure 10 – Utility Operation Screen