Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE - Manual (Page 159)

OPERATOR INTERFACE TERMINAL PV-550 REV E 7-35
1557-UM050F-EN-P – June 2013
The changes take affect immediately, however are not saved until you press [F10] and exit the
screen. Any time prior to this you may cancel all the changes made after coming to the screen by
pressing the [F7] key.
View Drive Status
The status of the drive is viewed by pressing the [F7] key from the Top Level Menu. This screen,
shown in Figure 60, constantly displays the latest status of the drive.
View & Reset Alarms
All drive faults and warnings are logged to a typical alarm screen as shown in Figure 61.
Collectively the faults and warnings are referred to as alarms. When a new alarm occurs, the F6
key of any screen will begin to flash in reverse video. Pressing the [F6] key on any screen will
bring you to this screen.
Figure 58 – Custom Display Screen Figure 59 – Assign a Variable/Parameter
Figure 60 – Status Screen