Rockwell Automation 1769-SDN Compact I/O DeviceNet Scanner Module User Manual - Manual (Page 104)

104 Publication 1769-UM009E-EN-P - August 2009
Chapter 7 Use the 1769-SDN Scanner Module with MicroLogix Controllers
RSLogix 500 Programming
Software I/O Configuration One of the advanced features of RSLogix 500 software is the ability to have
the programming software establish a communication connection with the
controller and read which I/O modules are attached to the controller. This
capability significantly reduces the effort involved in configuring a system.
This section illustrates how to determine which I/O modules are attached to
the controller, and manually configure the modules. We will then configure the
scanner. An example network is shown below.
DeviceNet Network
Series 9000
Photoeye
1770-KFD PC
Communication
Module
MicroLogix 1500 Controller I/O Bank
with 1769-SDN Scanner Module
MicroLogix 1000 Controller
Connected via 1761-NET-DNI
Interface MicroLogix 1200 Controller
Connected via 1761-NET-DNI
Interface
1305 Drive Connected via 1203-GU6
Enhanced DeviceNet Communication Module
Personal Computer Running RSNetWorx
for DeviceNet Software
RediSTATION
Interface