Rockwell Automation 1734-VHSC24 Very High-Speed Counter Modules User Manual - Manual (Page 27)

Publication 1734-UM003B-EN-P - August 2005
Install the Module 2-5
1. Using a bladed screwdriver, rotate the keyswitch on the
mounting base clockwise until the number required for the type
of module you are installing aligns with the notch in the base.
1734-VHSC24 - Position 2
1734-VHSC5 - Position 2
2. Make certain the DIN rail locking screw is in the horizontal
position, noting that you cannot insert the module if you unlock
the locking mechanism.
3. Insert the module straight down into the mounting base,
and press to secure.
The module locks into place.
Turn the keyswitch to align
the number with the notch.
Notch
(position 3 shown)
44009
Make sure the DIN rail
locking screw is in the
horizontal position.
44010
24VDC Source Output
Module Status
Network Status
1734 OB4E
NODE:
0
1
2
3
44012