Rockwell Automation 1734-VHSC24 Very High-Speed Counter Modules User Manual - Manual (Page 49)

Publication 1734-UM003B-EN-P - August 2005
Configure Your Module 4-7
3. From the General dialog, click Device Parameters and complete
the actions shown in the figure.
This dialog appears after clicking the
Device Parameters tab. If you want
the existing parameters uploaded
from the module, select Upload. The
following dialog then shows the
existing parameters set on the
module.
Use this pulldown menu to
edit or view the parameters.
Available choices are:
POINTBus
Status
Configuration