Rockwell Automation 1792D-4BVOD ArmorBlock MaXum 4 Input Module Series B - Manual (Page 7)

ArmorBlock MaXum 4 Input Module Series B 7
Publication 1792D-IN017B-EN-P - September 2000
Input connectors for this module are shown below.
DeviceNet Cable
DeviceNet cables are described in the installation publications for the
cable base assembly of your choice. Refer to the following
publications:
•
1792D-IN009B-EN-P ArmorBlock MaXum Cable Base
Installation Guide
•
DN-6.7.2 DeviceNet Cable Planning and Installation Manual
Communicate With Your ArmorBlock MaXum Module
This ArmorBlock module’s I/O is exchanged with the master through
a poll, change-of-state, or cyclic connection.
The module produces or consumes data as follows:
Cyclic - allows configuration of the block as an I/O client. The block
will produce and consume its I/O cyclically at the rate configured.
Type of I/O Connections Consumes Produces
Cyclic 0 Byte 2 Bytes
Polled 0 Byte 2 Bytes
Change-of-State 0 Byte 2 Bytes
41461
Input 0
Input 1 Input 2
Input 3
Connector A
Connector B Connector C
Connector D