Rockwell Automation 1784-PCM2/B CABLE Installation Instructions - Manual (Page 3)

1784-PCM2/B Cable 3
Publication 1784-5.22 – January 1997
3. Separate the wedge from the electronics pod.
4. Remove the paper backing from the wedge.
19950
!
ATTENTION: The adhesive on the wedge is very strong.
Once you remove the protective paper and attach the
wedge to the computer, you cannot remove the wedge.
Be sure you are confident about the position of the wedge
before you secure it.
5. Place the wedge on the computer where you marked the location.
19873