Installing and connecting a chassis – Rockwell Automation 1756-RIO ControlLogix Remote I/O (RIO) Communication Interface Module Installation Instr User Manual
Page 12
Advertising
12 ControlLogix Remote I/O (RIO) Module
Rockwell Automation Publication 1756-IN610B-EN-P - November 2010
Installing and Connecting a Chassis
Before installing the module, you must install and connect a ControlLogix
chassis and power supply. See ControlLogix Chassis Installation Instructions,
publication
To determine the slot location in the chassis, remember that chassis slots are
numbered starting from the left, at 0. Slot 0 is the first slot to the right of the
power supply.
You can do the following:
•
Use any size chassis.
•
Install the module in any available slot.
•
Install multiple 1756-RIO modules in the same chassis, depending on
how your power supply is rated.
Advertising