Rockwell Automation 1756-EN2F ControlLogix EtherNet/IP Module Installation Instructions - Manual (Page 13)

ControlLogix EtherNet/IP Module 13
Rockwell Automation Publication 1756-IN606B-EN-P - April 2010
Connect the Module to the EtherNet/IP Network
Attach the LC2 fiber cable to the Ethernet port on the bottom of the module as
shown.
ATTENTION: Do not look directly into the optical port. Under
certain conditions, viewing the optical port may expose the eye to
hazard. When viewed under some conditions, the optical port may
expose the eye beyond the maximum permissible exposure
recommendations.
Class 1 laser product. Laser radiation is present when the system is
open and interlocks bypassed. Only trained and qualified personnel
should be allowed to install, replace, or service this equipment.
Item Description Item Description
1 USB port 2 LC2 multi-mode fiber cable
(optical port to which it connects
is underneath module)
1
2