Configure the module, Apply chassis power – Rockwell Automation 1756-EN2F ControlLogix EtherNet/IP Module Installation Instructions User Manual
Page 15
Advertising
ControlLogix EtherNet/IP Module 15
Rockwell Automation Publication 1756-IN606B-EN-P - April 2010
Configure the Module
Follow these steps to configure the module.
1. In RSLogix 5000 software, from the Controller Organizer, select New
Module.
2. Select the module you want to configure.
For more configuration information, refer to the EtherNet/IP Modules in
Logix5000 Control Systems User Manual, publicat
. View or
Apply Chassis Power
31593-M
Advertising