Rockwell Automation 1747-ACNR15 ControlNet Adapter Module User Manual - Manual (Page 122)

Publication 1747-UM003A-EN-P
B-30 Understanding Your SLC 500/1746 Control System
6. Cover all unused slots with the Card Slot Filler, Catalog Number
1746-N2, to keep the chassis free from dust and debris.
Removing I/O Modules
1. Disconnect power.
2. Press and hold the module release located on each self-locking tab and
slide the module out of the chassis slot.
3. Cover all unused slots with the Card Slot Filler, Catalog Number
1746-N2, to keep the chassis free from dust and debris.
ATTENTION
!!!!
Disconnect power before attempting to install, remove, or
wire modules.
OUTPUT INPUT
Wires leading
to output and input devices
Wire Tie