Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual - Manual (Page 72)

66 Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
Appendix B Adapter Web Dialogs
1. Click I/O Connections tab at the top of the page or panel on the left.
The I/O Connections page opens.
2. From the I/O Connections page, view the following:
• Connection Number
• Uptime
• Missed Rx Packets
• O-T (Originator-Target) Connection ID
• T-O (Target-Originator) Connection ID
• O-T (Originator-Target) Size
• T-O (Target-Originator) Size
• O-T (Originator-Target) Type
• T-O (Target-Originator) Type
• O-T (Originator-Target) API
• T-O (Target-Originator) API
• Timeout (msec)
Work with the
Configuration Pages To work with the Configuration pages, follow these procedures.
The top value in this column representing Lost shows
the number of packets from the missing source.
IMPORTANT The values on these pages are in non-volatile memory. Changes to these
parameters do not take effect until you reset or cycle power through the
I/O adapter.