Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual - Manual (Page 8)

2 Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
Chapter 1 About the SLC 500 EtherNet/IP Adapter
Connections can be made to support 1746 and 1747 analog, digital, and specialty
I/O modules installed in the backplane.
For the complete list of supported I/O modules, see the table, List of I/O
Modules Supported by the 1747-AENTR Adapter on page 21 .
Hardware Components The adapter module consists of the following hardware components:
IMPORTANT Logix Designer application (previously RSLogix 5000) revision 21 and
later, and firmware revision 2.001 and later supports:
• multiple chassis, with a maximum number of three chassis;
• a maximum of 30 SLC I/O modules;
• a maximum of 96 Class 1 connections;
• up to 8 Class 3 connections.
5.15
1.37
5.72
1747-AENTR
Link 1 Link 2
LINK1 LINK2 MOD
Side view
Network switches
Front view
Latch
PCB
Front cover
4-character dot matrix display
Module status indicator
Link 2 status indicator
Link 1 status indicator
RJ-45 Ethernet connectors