Rockwell Automation 1756-CN2_CN2R, Series B ControlLogix ControlNet Interface Module - Manual

Installation Instructions
ControlLogix ControlNet Interface Module
Catalog Numbers 1756-CN2, 1756-CN2R, Series B
Topic Page
Important User Information 2
European Hazardous Location Approval 3
North American Hazardous Location Approval 4
Environment and Enclosure 5
Prevent Electrostatic Discharge 5
The ControlNet Interface Module and Redundant Media 6
Understanding Standalone and Redundant Control 6
Example Redundant System 7
Before You Begin 8
Parts List 8
Identify Module Features 9
Set the Module’s Network Address Switches 10
Reset the Module to the Original Factory Settings 10
Keeper Configuration - Automatic Keeper Crossload 11
Prepare the Chassis for Module Installation 12
Determine Module Slot Location 12
Install the Module 13
Connect the Module to the Network 14
Remove the Module 18
Install or Remove the Module Under Power 18
Install the EDS File 19
Configure RSLinx Software to Use the USB Port 20
Set Up the USB Driver 21
Status Indicators 22
Module Status Indicator and Display 23
ControlNet Channel Status Indicators 29
Specifications 31
Additional Resources 35