Rockwell Automation 1794-APBDPV1 FLEX I/O PROFIBUS Communications Adapter - Manual (Page 5)

Publication 1794-IN114C-EN-P - August 2010 5 PN-89164
Supersedes Publication 1794-IN114B-EN-P- April 2009 Copyright © 2010 Rockwell Automation, Inc. All rights reserved.
Mounting Dimensions
Specifications - Flex I/O PROFIBUS 1794-APBDPV1
Environmental Specifications
Certifications
Specification Description
I/O capacity 8 modules
Input voltage rating 24V DC nom
19.2V...31.2 V DC (includes 5% AC ripple)
Input current 385 mA max, 309 mA at 24V DC
Inrush current 23 A for 2 ms
Communication rate All rates up to 12.0 Mbits/s
Indicators Status- red/green
PROFIBUS- red/green
Flexbus output current 640 mA max
Isolation voltage 50V (continuous), Basic Insulation Type
Profibus to FLEX backplane to power
Routine tested at 850V DC for 1 s, Profibus to Backplane to Power
Type tested at 850V AC for 60 s, Profibus to Backplane to Power
Power dissipation 4.2 W max @ 19.2V DC
Thermal dissipation Max 14 BTU/hr @ 19.2V DC
Dimensions, approx.
(HxWxD)
87 x 69 x 69 mm
(3.4 x 2.7 x 2.7 in.)
Wire size
- Power
0.34... 2.5 mm 2 (22...12 AWG) solid or stranded copper wire rated at 75 °C
(167 °F ) or greater 1.2 mm (3/64 in.) insulation max
Wire category (1)
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication
1770-4.1 .
1 on power ports
2 on communications ports
North American temp code T4
IEC temp code T4
PROFIBUS cable Standard drop cable
PROFIBUS connector plug 9-pin D-shell
Emclosure type rating None (open-style)
(Inches)
Millimeters
(3.4)
87
(3.2)
80
(2.7)
68
(0.83) 21
(1.4)
35
A
(2.3)
59
B
(2.0)
50
(1.2)
28
C
44562 A = Mounting hole dimensions for optional mounting kit
B = DIN rail
C = Secure DIN rail approximately every 200mm (7.87 in.)
Module 1794-APBDPV1
Operating temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
0…55 °C (32…131 °F)
Storage temperature IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock):
–40…85 °C (–40…185 °F)
Surrounding air temperature, max. 55 °C (131 °F)
Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat):
5…95% noncondensing
Vibration IEC 60068-2-6 (Test Fc, Operating):
5 g @ 10…500 Hz
Shock IEC60068-2-27 (Test Ea, Unpackaged shock):
Operating 30 g
Nonoperating 50 g
Emissions CISPR 11:
Group 1, Class A
ESD immunity IEC 61000-4-2:
6 kV contact discharges
8 kV air discharges
Radiated RF immunity IEC 61000-4-3:
10V/m with 1 kHz sine-wave 80% AM from 80…2500 MHz
3V/m with 1 kHz sine-wave 80% AM from 2500…2700 MHz
EFT/B immunity IEC 61000-4-4:
±2 kV at 5 kHz on power ports
±2 kV at 5 kHz on communication ports
Surge transient immunity IEC 61000-4-5:
±2 kV line-earth (CM) on communications ports
Conducted RF immunity IEC 61000-4-6:
10V rms with 1 kHz sine-wave 80% AM from 10 kHz…80 MHz
Certifications (when product is marked) (1)
(1) See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification
details.
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada.
See UL File E65584
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations,
certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61326; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
EN 60079-0; General Requirements
II 3 G Ex nA II T4 X